「快速门帘布」堆积门帘布定做更换

「快速门帘布」堆积门帘布定做更换


Customized Replacement of "Fast Door Curtain Cloth" Stacked Door Curtain Cloth

在很多场所快速堆积门使用久了，会出现帘布老旧的现象，也有一些特殊原因，出现门体部分遭到撞击的现象，如果不及时更换，就会影响快速门的正常使用，降低企业形象。


In many places, the fast stacking doors have been used for a long time, and there will be old curtain. There are also some special reasons. The door body part will be impacted. If it is not replaced in time, it will affect the normal use of the fast stacking doors and reduce the corporate image.
 

用户要更换快速门的帘布，首先要对原有的帘布进行精确的测量，然后要确定帘布的颜色，是否加视窗，还有抗风筋选择什么材质。


In order to replace the curtain for fast doors, users should first measure the original curtain accurately, and then determine the color of the curtain, whether to add windows, and what material to choose for the wind-resistant ribs.


更换快速门帘布要选择专业的常见，这样加工的帘布才能够美观，耐用，在快速门帘布的加工过程中，让其保持平整服帖是关键，有很多用户会遇到过对堆积门布上有很多褶皱的情况，经分析，原因如下


Replacement of fast door curtain cloth should choose professional common, so that the processed curtain cloth can be beautiful and durable. In the process of fast door curtain cloth processing, it is the key to keep it flat. Many users will encounter many folds on the stacked door curtain. After analysis, the reasons are as follows.


堆积门帘布有褶皱的原因：


Causes of folds in stacked door curtain cloth:


一、门布比较薄 ，使用厚的帘布出现褶皱几率低一些 。


First, the door cloth is thinner, and the possibility of folding is lower when using thick curtain cloth.


二、使用热风焊机温度过高或者过低。


2. The temperature of hot air welding machine is too high or too low.


三、使用缝纫机缝制的时候针脚过密。


Thirdly, when sewing with sewing machine, the stitches are too tight.


四、使用缝纫机的时候缝纫机送布的齿条输送布的时候自动完成 ，解决的办法人工辅助输送 。


4. When using the sewing machine, the rack conveying cloth is automatically completed when the sewing machine feeds cloth, and the solution is manual auxiliary conveying.


五、门布在穿入铝合金抗风棒的时候没有抻直处理 。


Fifth, the door cloth is not straightened when it is penetrated into the aluminium alloy wind rod.


六、焊机以及穿布到时候没有按工艺制作 ，造成堆积门褶皱过多。


6. Welding machine and cloth were not manufactured according to the process at that time, which resulted in excessive folds of stacking doors.


七、使用高频焊机更容易使门布平整 ，高频焊机是压力及温度粘贴门布 ，热风机是行走过程中焊接门布 ，所以有形成褶皱的可能 。


7. It is easier to smooth the door cloth by using high frequency welding machine. The high frequency welding machine is to paste the door cloth with pressure and temperature. The hot air fan is to weld the door cloth in the course of walking, so it is possible to form folds.


综上，堆积门帘布上出现过多褶皱，适合厂家提供的生产原材料以及工人的技术、设备的先进程度有关的。


To sum up, there are too many folds on the stacked door curtain cloth, which is suitable for the raw materials provided by manufacturers and the advanced level of workers'technology and equipment.