-
「山水工业门控制箱」提升门控制箱安全提示
Safety Tips for Lifting Door Control Box of Shanshui Industry Door Control Box
1、在安装工业门控制箱前,请仔细阅读产品说明书,并按照正确要求进行操作,安装完成后,注意保管说明书,以便保养维修室参考。
1. Before installing the industrial door control box, please read the product instructions carefully and operate according to the correct requirements. After installation, pay attention to the maintenance instructions for reference in the maintenance room.
2、请却过保门体运行良好,无卡滞;只有在安装了平衡系统、平衡良好的滑升门体上安装此开门机,否则坑你造成开门机超载损坏;安装时您务必请专业安装人员进行检查和安装。
2. Please ensure that the door body runs well without jamming; only install the door opener on the sliding door body with balanced system and good balance, otherwise the pit will cause overload damage of the door opener; when installing, you must ask the professional installer to check and install it.
3、安装及布线必须依照建筑是哦干标准及电器标准进行,线径≥1.5平方毫米;电源必须具有可靠的接地,禁止去除电源线上的接地引线。
3. Installation and wiring must be carried out in accordance with building standards and electrical standards, with wire diameter greater than or equal to 1.5 square millimeters; the power supply must have reliable grounding, and it is forbidden to remove grounding leads from the power supply line.
4、山水提升门控制箱安装在能观察到门体运行情况的地方,而且应离地1.4米以上,以防儿童无意间触碰。同时不要在看不见门体运行的地方用遥控器进行开关门操作。
4. Mountains and rivers lifting door control box is installed in the place where the operation of the door body can be observed, and should be more than 1.4 meters away from the ground, in order to prevent children from accidentally touching. At the same time, do not use remote control to switch the door where the door body can not be seen.
5、工业门控制箱前段应紧挨装单独的空气开关,通过空气开关在介入控制箱中,接线、维护时必须先断开空气开关。
5. The front section of the industrial door control box should be fitted with a separate air switch. The air switch must be disconnected before wiring and maintenance in the intervention control box.
6、滑升门导轨藕断必选紧挨装机械限位装置,以防门体滑出导轨,发生意外。
6. When the sliding door guide rail is broken, the mechanical limit device must be installed next to it to prevent the door body from sliding out of the guide rail and accidents.
7、在修理和移动开门机前,请切断单电源,同时应保证在门体无自重坠落危险的情况下进行。
7. Before repairing and moving the door opener, please cut off the single power supply and ensure that the door body is free from the danger of self-weight falling.
8、在门额提运行时,严禁行人、车辆从门体下方通行和停留。
8. It is strictly forbidden for pedestrians and vehicles to pass and stay under the door when the doorway is lifted.
9、严禁在开门机运行过程中,拉动开门机上的红色和绿色拉手,以避免造成机器的损坏。
9. It is strictly forbidden to pull the red and green handles on the door opener in order to avoid damage to the machine.
10、为保护过往行人和车辆安全,在门体上必须安装红外等安全保护装置。
10. In order to protect the safety of passers-by and vehicles, infrared protection devices must be installed on the door.
11、经常检查相关的安全保护装置以及门体的运行状况,确保门体安全可靠的运行。
11. Check the relevant safety protection devices and the operation status of the door body regularly to ensure the safe and reliable operation of the door body.
「山水工业门控制箱」提升门控制箱安全提示
Safety Tips for Lifting Door Control Box of Shanshui Industry Door Control Box
「山水工业门控制箱」提升门控制箱安全提示
作者:SEJ快速门变频控制箱 时间:2019/7/13 15:48:50- sej快速门电机回馈老客户,0.75KW电控系统特价销售 22-11-29
- 快速门左右安装空间不足可以考虑管状电机 22-11-12
- SEJ/BMD—80L/4快速门电机 22-08-27
- 快速门限位开关的分类 22-07-23
相关新闻: