「工业门控制箱」先锋控制箱特点

「工业门控制箱」先锋控制箱特点


Characteristics of Pioneer Control Box of Industrial Door Control Box

1、电控箱：电控箱面板设有开、关、停三按键，并设有急停开关，遇紧急情况可快速切断控制回路电源，保护人、机安全；


1. Electronic control box: The panel of the electronic control box has three buttons: on, off and off, and an emergency stop switch. In case of emergency, the power supply of the control circuit can be switched off quickly to protect the safety of the person and the machine.

2、控制箱内设有多种接口：红外、安全气囊接口，门中门安全保护开关接口欧，警灯接口等；三按钮开关在开门到位时可输出无源信号，供特殊场所使用。


2. There are many kinds of interfaces in the control box: infrared, airbag interface, door safety switch interface, alarm lamp interface, etc. When the three-button switch is in place, it can output passive signals for use in special places.


3、遥控器可选配：遥控器为学习码，您如需要可选配学习码遥控器。


3. Optional remote control: The remote control is learning code, you can choose learning code remote control if you need.


4、手动开关装置：在停电等紧急情况下，可通过转换拉手实现手动与电动开关门转换，使电动提升门电机减少故障。可靠性更高。


4. Manual switching device: In emergency situations such as power outage, manual and electric switching door can be realized by changing the handle, so as to reduce the fault of electric hoist door motor. Higher reliability.


5、双凸轮限位：采用双凸轮限位，安全可靠。


5. Double cam limit: Double cam limit, safe and reliable.


6、提供一个无源信号，方便特殊用户使用。


6. Provide a passive signal for special users.


在您收到「先锋工业门控制箱」以及提升门电机后，请您先开箱检查，产品是否有破损，并根据装箱检查随机附件、资料是否齐全，发现异常及时与我们联系。


After you receive the "Pioneer Industrial Door Control Box" and the lifting door motor, please open the box first to check whether the product is damaged, and check the random accessories and data according to the packing, and contact us in time if any abnormalities are found.

包括：


Include:


主机 一台；安装架 一件，固定套 贰件，平键 6*80 一件；外六角螺栓M10*20 四件；平垫圈 四件；控制盒 一只；遥控器 贰套；四芯线 五米；三芯线 五米；紧固螺钉 M8*10   二件；内六角扳手 2.5   一件；说明书 一本；保修卡 一张  ；合格证  一张


One main engine; one mounting frame, one fixed sleeve, one flat key 6*80; four outer hexagonal bolts M10*204; four flat washers; one control box; remote control sleeve; four core wires 5 meters; three core wires 5 meters; fastening screw M8*102; one inner hexagonal wrench 2.5; one instruction book; one warranty card A certificate of qualification

 

「工业门控制箱」先锋控制箱特点


Characteristics of Pioneer Control Box of Industrial Door Control Box